Algebraic version of CylinderWithFlagMesh. More...
#include <cylinder_with_flag_mesh.template.h>
Public Member Functions | |
| AlgebraicCylinderWithFlagMesh (Circle *cylinder_pt, GeomObject *top_flag_pt, GeomObject *bottom_flag_pt, GeomObject *tip_flag_pt, const double &length, const double &height, const double &flag_length, const double &flag_height, const double ¢re_x, const double ¢re_y, const double &a, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor. Pass the pointers to the GeomObjects that parametrise the cylinder, the three edges of the flag, the length and height of the domain, the length and height of the flag, the coordinates of the centre of the cylinder and its radius. Timestepper defaults to Steady default timestepper. More... | |
| virtual | ~AlgebraicCylinderWithFlagMesh () |
| Destructor: empty. More... | |
| void | set_bottom_flag_pt (GeomObject *bottom_flag_pt) |
| Set geometric object that defines the bottom face of the flag. More... | |
| void | set_top_flag_pt (GeomObject *top_flag_pt) |
| Set the geometric object that defines the top face of the flag. More... | |
| void | set_tip_flag_pt (GeomObject *tip_flag_pt) |
| Set the geometric object that defines the tip of the flag. More... | |
| GeomObject * | bottom_flag_pt () const |
| Read-only access to geometric object that defines the bottom face of the flag. More... | |
| GeomObject * | top_flag_pt () const |
| Read-only access to geometric object that defines the top face of the flag. More... | |
| GeomObject * | tip_flag_pt () const |
| Read-only access to geometric object that defines the tip of the flag. More... | |
| void | update_node_update (AlgebraicNode *&node_pt) |
| Update the geometric references that are used to update node after mesh adaptation. Empty – no update of node update required without adaptativity. More... | |
| void | algebraic_node_update (const unsigned &t, AlgebraicNode *&node_pt) |
| Update nodal position at time level t (t=0: present;. More... | |
 Public Member Functions inherited from oomph::CylinderWithFlagMesh< ELEMENT > | |
| CylinderWithFlagMesh (Circle *cylinder_pt, GeomObject *top_flag_pt, GeomObject *bottom_flag_pt, GeomObject *tip_flag_pt, const double &length, const double &height, const double &flag_length, const double &flag_height, const double ¢re_x, const double ¢re_y, const double &a, TimeStepper *time_stepper_pt=&Mesh::Default_TimeStepper) | |
| Constructor. Pass the pointers to the GeomObjects that parametrise the cylinder, the three edges of the flag, the length and height of the domain, the length and height of the flag, the coordinates of the centre of the cylinder and its radius. Timestepper defaults to Steady default timestepper. More... | |
| virtual | ~CylinderWithFlagMesh () |
| Destructor: Kill the domain. More... | |
| CylinderWithFlagDomain * | domain_pt () |
| Access function to the domain. More... | |
Protected Member Functions | |
| void | setup_algebraic_node_update () |
| Function to setup the algebraic node update. More... | |
| void | node_update_I (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_II (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_III (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_IV (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_V (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_VI (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_VII (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_VIII (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
| void | node_update_IX (const unsigned &t, AlgebraicNode *&node_pt) |
| Helper function. More... | |
Protected Attributes | |
| GeomObject * | Cylinder_pt |
| Cylinder. More... | |
| GeomObject * | Top_flag_pt |
| Top flag. More... | |
| GeomObject * | Bottom_flag_pt |
| Bottom flag. More... | |
| GeomObject * | Tip_flag_pt |
| Tip flag. More... | |
| double | Length |
| Length of the domain. More... | |
| double | Height |
| Height of the domain. More... | |
| double | Flag_length |
| Flag length. More... | |
| double | Flag_height |
| Flag thickness. More... | |
| double | Centre_x |
| x position of the centre of the cylinder More... | |
| double | Centre_y |
| x position of the centre of the cylinder More... | |
| double | A |
| radius of the cylinder More... | |
| Protected Attributes inherited from oomph::CylinderWithFlagMesh< ELEMENT > | |
| CylinderWithFlagDomain * | Domain_pt |
| Pointer to the domain. More... | |
Detailed Description
template<class ELEMENT>
class oomph::AlgebraicCylinderWithFlagMesh< ELEMENT >
Algebraic version of CylinderWithFlagMesh.
Definition at line 161 of file cylinder_with_flag_mesh.template.h.
Constructor & Destructor Documentation
◆ AlgebraicCylinderWithFlagMesh()
|
inline |
Constructor. Pass the pointers to the GeomObjects that parametrise the cylinder, the three edges of the flag, the length and height of the domain, the length and height of the flag, the coordinates of the centre of the cylinder and its radius. Timestepper defaults to Steady default timestepper.
Definition at line 172 of file cylinder_with_flag_mesh.template.h.
◆ ~AlgebraicCylinderWithFlagMesh()
|
inlinevirtual |
Destructor: empty.
Definition at line 205 of file cylinder_with_flag_mesh.template.h.
Member Function Documentation
◆ algebraic_node_update()
| void oomph::AlgebraicCylinderWithFlagMesh< ELEMENT >::algebraic_node_update | ( | const unsigned & | t, |
| AlgebraicNode *& | node_pt | ||
| ) |
Update nodal position at time level t (t=0: present;.
The algebraic node update function.
t>0: previous)
Definition at line 1367 of file cylinder_with_flag_mesh.template.cc.
◆ bottom_flag_pt()
|
inline |
Read-only access to geometric object that defines the bottom face of the flag.
Definition at line 237 of file cylinder_with_flag_mesh.template.h.
◆ node_update_I()
|
protected |
Helper function.
Node update for region I.
Definition at line 1426 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_II()
|
protected |
Helper function.
Node update for region II.
Definition at line 1465 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_III()
|
protected |
Helper function.
Node update for region III.
Definition at line 1501 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_IV()
|
protected |
Helper function.
Node update for region IV.
Definition at line 1549 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_IX()
|
protected |
Helper function.
Node update for region IX.
Extreme angles on circle
Definition at line 1816 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_V()
|
protected |
Helper function.
Node update for region V.
Definition at line 1596 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_VI()
|
protected |
Helper function.
Node update for region VI.
Definition at line 1645 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_VII()
|
protected |
Helper function.
Node update for region VII.
Definition at line 1688 of file cylinder_with_flag_mesh.template.cc.
◆ node_update_VIII()
|
protected |
Helper function.
Node update for region VIII.
Extreme angles on circle
Definition at line 1732 of file cylinder_with_flag_mesh.template.cc.
◆ set_bottom_flag_pt()
|
inline |
Set geometric object that defines the bottom face of the flag.
Definition at line 210 of file cylinder_with_flag_mesh.template.h.
References oomph::CylinderWithFlagDomain::bottom_flag_pt(), and oomph::CylinderWithFlagMesh< ELEMENT >::domain_pt().
◆ set_tip_flag_pt()
|
inline |
Set the geometric object that defines the tip of the flag.
Definition at line 228 of file cylinder_with_flag_mesh.template.h.
References oomph::CylinderWithFlagMesh< ELEMENT >::domain_pt(), and oomph::CylinderWithFlagDomain::tip_flag_pt().
◆ set_top_flag_pt()
|
inline |
Set the geometric object that defines the top face of the flag.
Definition at line 219 of file cylinder_with_flag_mesh.template.h.
References oomph::CylinderWithFlagMesh< ELEMENT >::domain_pt(), and oomph::CylinderWithFlagDomain::top_flag_pt().
◆ setup_algebraic_node_update()
|
protected |
Function to setup the algebraic node update.
Setup algebraic node update.
set the size ??
Definition at line 935 of file cylinder_with_flag_mesh.template.cc.
◆ tip_flag_pt()
|
inline |
Read-only access to geometric object that defines the tip of the flag.
Definition at line 252 of file cylinder_with_flag_mesh.template.h.
◆ top_flag_pt()
|
inline |
Read-only access to geometric object that defines the top face of the flag.
Definition at line 245 of file cylinder_with_flag_mesh.template.h.
◆ update_node_update()
|
inline |
Update the geometric references that are used to update node after mesh adaptation. Empty – no update of node update required without adaptativity.
Definition at line 261 of file cylinder_with_flag_mesh.template.h.
Member Data Documentation
◆ A
|
protected |
radius of the cylinder
Definition at line 331 of file cylinder_with_flag_mesh.template.h.
◆ Bottom_flag_pt
|
protected |
Bottom flag.
Definition at line 307 of file cylinder_with_flag_mesh.template.h.
◆ Centre_x
|
protected |
x position of the centre of the cylinder
Definition at line 325 of file cylinder_with_flag_mesh.template.h.
◆ Centre_y
|
protected |
x position of the centre of the cylinder
Definition at line 328 of file cylinder_with_flag_mesh.template.h.
◆ Cylinder_pt
|
protected |
Cylinder.
Definition at line 301 of file cylinder_with_flag_mesh.template.h.
◆ Flag_height
|
protected |
Flag thickness.
Definition at line 322 of file cylinder_with_flag_mesh.template.h.
◆ Flag_length
|
protected |
Flag length.
Definition at line 319 of file cylinder_with_flag_mesh.template.h.
◆ Height
|
protected |
Height of the domain.
Definition at line 316 of file cylinder_with_flag_mesh.template.h.
◆ Length
|
protected |
Length of the domain.
Definition at line 313 of file cylinder_with_flag_mesh.template.h.
◆ Tip_flag_pt
|
protected |
Tip flag.
Definition at line 310 of file cylinder_with_flag_mesh.template.h.
◆ Top_flag_pt
|
protected |
Top flag.
Definition at line 304 of file cylinder_with_flag_mesh.template.h.
The documentation for this class was generated from the following files: